3
ā
Motorcycle Refit
Checks before driving
Carefully check
motorcycle according to
right table before driving
Checking items
Handle bar
Brake
Fuel storage
Gear box
Throttle
Clutch
Tyres
Transmission chain
Illumination and horn
Oil
Contents
Flexible turning, no clearance and looseness
Brake lever and brake pedal should have correct clearance, and brake lamp should light on when it is at braking
Enough for the traveling plan
Check oil level, and supplement if needed
Greaser grip and throttle cable should have suitable clearance with smooth acceleration and sharp turning off
Cables with suitable clearance and no stagnation
Correct air pressure, no crack and wound
Suitable tightness and with proper lubrication oil
Check the performance of illumination system and horn
Check the oil gauge of engine and confirm the correct oil position
Refit motorcycle or replace its original equipments are unable to ensure driving safety and illegal.
User must show respect to regulations from Traffic management department. Our company undertake no
responsibility to refitted motorcycle without authorization.
Caution:
1.Wiring or changes without authorization is not allowed.
2.When fuse is broken, replace by copper wire or fuse with other capacity is not allowed.
3.When parking at night, turn off the fuel switch.
4.Loading weight on luggage rack should be no more than 5 kg.
5.Qualification certificate should avoid moisture and without folding.
Our company undertake no responsibility of motorcycle burnout or other quality problems due to
cases above.
Warning:
To Next Page
Loading...
Need help?
General