Long range MT4300-C - System Setup Menu; Accessing System Setup; Changing System Password; Modifying System ID Settings

System Setup
The System Setup Menu is accessed from the Main Menu (option 7) and requires a 4-digit
password. The MT4300-C ships with a default password of 1234. It is recommended that this
password is changed once the unit is received. You may do this in the System Setup Menu. There
are 7 options in the System Setup Menu. Each option is described below.
1
2
1
Change Password
Here is where you can change your password. Enter your new 4-digit password and press
ENTER. This will remain the password to get into the System Setup Menu.
Change System ID
This changes the current channel and message format the MT4300-C is set to. Initially, this is
set to Channel 1, unless otherwise requested. To change the channel, from the Chg System ID
Menu, press 1 to choose RF Channel. Next, press button 1 to select the MT Channel option.
Press ENTER to change the channel. Finally, press BACK to save the new channel.
Select Option 7, System Setup
From the Main Menu, press button 7 to
select the System Setup option. You will be
prompted to enter your 4-digit password, then
press ENTER.
Enter Password
1234
System Setup
1
2
3
Chg Password
Chg System ID
Target Mgt
1
2
Set System IDs
RF Channel
Msg Format
1
2
Set RF Channel
MT Channel
Link Mode
4
5
6
Trap Modes
Backlight
Trap Status
7 Terminal Mode
System Setup Options
15