Long range MT4300-C - Manual Mode Operations; Firing Single Traps; Firing True Pair Traps

5
Manual Mode
Manual Mode allows the user to manually re any individual trap or any combination of 2 traps
simultaneously. You can get to Manual Mode by pressing the 1 button from the Main Menu, or by
pressing 1 from the Solo Shooter Menu after you have set the Trap Delays.
1
1
2
Select Trap Number
Each trap will have a corresponding
number from 1 to 15. By pressing 1-9, the
coresponding trap will instantly re. To re
a trap with a double digit number, the zero
button must be pressed rst. The trap will re
when the last button is pressed. For example,
to re trap 15, you must press 0, 1, 5. The trap
will re when the 5 button is pressed.
Press the “True Pair” Button
Select First Trap
Each trap will have a corresponding number
from 1 to 15. By pressing 1-9, the number will
display next to the rst trap. To enter a trap
with a double digit number, the zero button
must be pressed rst. Press the zero button.
The square cursor begins to blink. Now enter
the corresponding double digit. The number
will display next to the rst trap.
Select Second Trap
By pressing 1-9, the two selected traps will
instantly re. To enter a trap with a double
digit number, the zero button must be pressed
rst. Press the zero button. The square cursor
begins to blink. Now enter the corresponding
double digit. The two selected traps will re
simultaneously when the last number is
pressed.
Manual Mode
1st _
2nd _
Choose Trap #
Count
0
Manual Mode
1st 5
2nd _
Choose Trap #
Count
0
Manual Mode
1st 5
2nd 1
Choose Trap #
Count
0
Firing Single Trap
Firing Two Traps Simultaneously (True Pair)
3
*If ring in Solo Shooter mode, the designated delay times will be added to the ring
sequence