Long range MT4300-C - Initial Setup and Keypad; Initial Setup Overview; Keypad Functions

Initial Setup
Unless otherwise requested, the MT4300-C will be preset to channel 1 and receivers will be set to
channel 1 and labeled with their appropriate trap number.
1
Current Channel
To Change Press
Enter
The default password is set to 1234. This can be changed in the System Setup Menu (&15).
Keypad
The MT4300-C has a 12 button keypad that assists the user to navigate through the menus. Some of
these buttons have multiple functions and are described in this section.
2
• 1A: Used to re trap 1 in Sporting
Clays and Super Sporting.
• 3C: Used to re trap 2 in Sporting
Clays and Super Sporting.
• 4D: Used to re trap 3 in Super
Sporting.
• 5E: Used to re a true pair in Sporting
Clays and Super Sport Sporting.
• 6F: Used to re trap 4 in Super
Sporting.
• 8H: Used to scroll up through menu
options.
• 0: Used to scroll down through menu
options.
• True Pair/Enter: Used to conrm
selections and re a true pair in Manual
Mode. Also used to activate Lock ON
Mode while in Manual Mode.
• ON/BACK: Used to turn on the device,
bring the device out of sleep mode, and
return to previous menu.
• The MT4300-C will go into sleep
mode after a period of inactivity.