Long range MT4300-C - Wobble Menu Navigation; Firing Double Traps in Super Sporting; Accessing Wobble Setup

Fire Two Traps Simultaneously
Press button 5. Select the rst trap to re
(button 1,3,4, or 6). Next, select the second
trap to re (button 1,3,4, or 6). Finally, press
button 5 again to re both selected traps
simultaneously. The target count will increase
accordingly. When you are ready to move to
the next station, press ENTER. The station
number will increase by 1 and the MT4300-C
will recongure to that specic station.
Sporting Clays
Station # 1
Next = Enter
Firing Target
4
*If ring in Solo Shooter mode, the designated delay times will be added to the
ring sequence
If at any point you need to exit Sport Clays Mode or change the station number, press the
BACK button and enter a new starting station number.
Wobble Menu
Wobble traps are traps that allow vertical and horizontal adjustments to vary target presentation.
When paired with a R4300 Wobble Receiver, the MT4300-C can control up to 4 wobble traps. Wobble
functions can be turned on or o󰀨, which causes the wobble trap to continuously move vertically and/
or horizontally. Small movements can also be made by using the “Nudge” feature. This feature moves
the wobble trap vertically or horizontally by small increments. Before using the MT4300-C to control
specic wobble traps, you must assign a trap number to each wobble trap. We do this in the Wobble
Setup Menu.
1
Select Option 5, Wobble Setup
From the Main Menu, press button 5 to select
the Wobble Setup option. This will bring you
to the Wobble Menu.
Solo Shooter
5
6
7
Wobble Setup
System Status
System Setup
4
Wobble Setup
Select Option 2, Wobble Setup
The Wobble Menu gives you two options,
Wobble Control and Wobble Setup. Press
button 2 to select the Wobble Setup option.
Wobble Menu
Wobble Control
Wobble Setup
1
2
2
10