Long range MT4300-C - Page 9

1
2
Press and Hold the ENTER Button
After you have locked in the two designated
traps and entered Report Mode (steps 1-3 on
previous page), press and hold the ENTER
button until the menu enters True Pair Mode
(approx. 3 seconds).
Press ENTER to Fire Both Traps
Simultaneously
The rst and second trap numbers are
displayed on the screen. When you press the
ENTER button, both traps will immediately re
simultaneously. The target count will increase
accordingly. The designated traps will continue
to re simultaneously every time you press the
ENTER button.
Report Mode
1st 3
2nd 15
Count
2
True Pair Mode
Firing Target
1st 3
2nd 15
Count
4
True Pair Mode
Press ENTER to Fire First Trap
The rst and second trap numbers are
displayed on the screen. The rst time you
press the ENTER button, the rst trap will
instantly re. The target count will increase
accordingly. To re the second trap, press
ENTER again. The designated traps will
continue to alternate every time you press the
ENTER button.
Press BACK to Exit
To change the designated trap numbers, or
end Report Mode, the BACK button will take
you back to Manual Mode. Repeat steps to
lock in new trap numbers.
Report Mode
Firing Target
1st 3
2nd 15
Count
1
Manual Mode
1st _
2nd _
Choose Trap #
Count
2
4
5
*If ring in Solo Shooter mode, the designated delay times will be added to the
ring sequence
*If ring in Solo Shooter mode, the designated delay time for Trap 1 will be added
to the ring sequence
7