LONGER Cube2 - Faq

8
www.longer3d.com support@longer3d.com
8. FAQ
How to solve
automatic unloading
of filament
1) Star-G-code Replacement
; -- START GCODE --
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z1 F1000 ;move up slightly
G92 E0
G1 Y60.0 Z0 E9.0 F1000.0;intro line
G1 Y100.0 E21.5 F1000.0 ;continue line
G92 E0 ;zero the extruded length again
G1 F80
;Put printing message on LCD screen
M117 Printing...
; -- end of START GCODE --
How to solve unable
to connect to printer
1) “AutoDetectBaudJob.py ”Replacement
https://drive.google.com/open?id=1P0AO6w3WCYMrLWhIPb3XoxIrjg4_Fqm7
https://drive.google.com/open?id=1VeoTU4RIrx-EUwmA7G5sweaPux4-1Xl_