To Next Page

To Previous Page

· oil temperature in the transmission is higher than 120 ℃ , the alarm lamp will be on and the

buzzer will sound.

2. Switch

Switch

Switch part

part

1 ） Preheat-starting

Preheat-starting

Preheat-starting switch

switch

OFF

This is the position which the key is inserted into or

taken off. The engine will be stopped at this

position.

When the starting switch is at "ON " position, the

circuit is close. After the engine startup, the key is

on this position.

START

When move the key to "START" position, the

starting motor engages. When the hand is off from

the key, the key will return to "ON" position by

means of the spring force.

Caution

· When the engine is stopped, do not let the engine switch stay at the "ON"position, or current

leakage of the battery may be caused.

· When the engine is running, do not turn the starting switch to "start" position, which will

damage the motor.

· When starts the engine every time, the engaging time do not exceed 15s. Wait for about 20s

before starting the engine again.

Lonking LG20D User Manual

Questions and Answers: