Lonking LG20D User Manual

36
3.
3.
3.
3. Control
Control
Control
Control part
part
part
part
1) Steering wheel ①
The steering wheel is operated in a regular
manner, namely when the steering wheel is
rotated right, the fork-lift truck will turn to
right; when the steering wheel is rotated left ,
the fork-lift truck will turn to left. The guide
wheels are installed at the rear of the forklift,
when the fork-lift truck turns, the tail can
swing outwards. Practise just a little, and the
steering manner will be mastered easily.
Warning
Warning
Warning
Warning
• The forklift supply power from the
engine for hydraulic steering device. So
when the engine is stopped, it will be
difficult to turn. If turn the machine again, it
is necessary to restart the engine. Do not
delay.
2)
2)
2)
2) Horn button ②
Press the plastic button in the middle of
steering wheel to sound alarm . Even when
the key switch is closed, the horn can also
sound
3)
3)
3)
3) Steering
Steering
Steering
Steering signal
signal
signal
signal lamp
lamp
lamp
lamp switch
switch
switch
switch lever
lever
lever
lever ③
When the handle is at the turning position,
steering signal lamp will flashes.
R Right steering lamp is on
N Middle position （ OFF ）
L Left steering lamp is on
Caution
Caution
Caution
Caution
The steering signal lamp switch lever can not
return to the middle position automatically.
You can reset it through manual control.
• 4 ） Lifting lever ⑧
• Pull the lever backward to lift the fork,
and push the lever forward to lower the fork.
The lifting speed is controlled by the tilt
angle of the lever and accelerating pedal
force, and the decline speed is controlled by

Lonking LG20D Specifications

General

Brand	Lonking
Model	LG20D
Category	Forklifts
Language	English