Lonking LG20D User Manual

72
gear rack
Check deformation, crack and damage
situationn
○ ○ ○ ○ ○
Steering
indicating
lamp
Working and installation situationn ○ ○ ○ ○ ○
Horn Working and installation situationn ○ ○ ○ ○ ○
Lamp and
bulb
Working and installation situationn ○ ○ ○ ○ ○
Back up
buzzer
Working and installation situationn ○ ○ ○ ○ ○
Rear
view mirror
Contamination, damage situationn ○ ○ ○ ○ ○
Instrument Working situationn of instrument ○ ○ ○ ○ ○
Seat
Check whether the bolt is loose or
damaged.
○ ○
Machine
body
Whether frame and beam are damaged
or cracked.
○
Whether rivets and bolts are loose.
Detection
hammer
○
If necessary, check the part repaired ○ ○ ○ ○ ○
Comprehensive inspection ○
Add grease
or replace
After cleaning, check the lubricating
situationn of the chassis.
Grease
gun
○ ○ ○ ○
Check the oil fluid in the oil tank ○
Caution
Caution
Caution
Caution
• When the oil, cooling fluid and antifreeze which are different with the specified products in
this truck are used, the replacement period can not be the same with the specified period in
the manual. Therefore, the replacement period should be shortened half or 1/4 of the
specified period in this manual.
• Although the high-viscosity oil has a wider operating temperature range, the replacement
should be needed. Owing to the additive can slowly deteriorate, the oil viscosity can reduce,
and the hydraulic system can be seriously damaged at the high temperature.

Lonking LG20D Specifications

General

Brand	Lonking
Model	LG20D
Category	Forklifts
Language	English