Lonking LG20D User Manual

40
Warning
Warning
Warning
Warning
• When closing the engine hood, pay
attention to not trap the finger inside it.
6 ） The fork positioning pin
The fork positioning pin is used to lock the
fork at certain position, when the fork
distance is regulated, pull up the fork
positioning pin and turn 1/4 circle,
regulate the fork to the required position,
and the fork distance shall be regulated
according to the goods to be loaded and
unloaded.
Warning
Warning
Warning
Warning
· place the fork symmetric to the center lineof
machine, then lock the fork positioning
pin.
7 ） Towing pin
The towing pin is only used under the
following conditions:
• W hen the forklift is trapped (for
instance, tire is trapped , side tilting )
•
•
•
• When the forklift is loaded or unloaded
from the trailer
Caution
Caution
Caution
Caution
• The forklift can ’ t be used to tow or be
towed.
8 ) Safety footboard and safety handle
Both sides of vehicle body are provided
with safety footboard, the safety handle is
installed on the left support rod of roof
steel grid, the safety footboard and safety
handle shall be used to get on and off the
forklift to ensure safety.
9 ） Fuse box
The fuse box is mounted right inside the
machine body frame, on the electrical control
cover in the front of starting battery..
10 ） Brake fluid reservoir
The brake fluid reservoir is arranged under
the engine hood , and the liquid level of brake
fluid can be checked via the semi-transparent
reservoir.

Lonking LG20D Specifications

General

Brand	Lonking
Model	LG20D
Category	Forklifts
Language	English