48
Release the parking brake lever.
Release the brake pedal and step down the
accelerating pedal, the machine will travel.
3
3
3
3 ） Gear
Gear
Gear
Gear shifting
shifting
shifting
shifting
Whenthe machine bears no load, start the
machine at the high speed gear. However
when the machine bears a load, start the
machine at the low speed gear.
The
The
The
The mechanical
mechanical
mechanical
mechanical forklift
forklift
forklift
forklift
a ） Change the travel direction to stop the
machine.
b ） when shift the high speed gear to low
speed gear or shift the low speed gear
to the high speed gear, let the engine
accelerate then release the
accelerating pedal. At the same time,
step down the clutch pedal. Change the
shifting lever to the required gear, then
release the clutch and step down the
accelerating pedal.
The hydraulic drive forklift
a ） Park the machine before changing the
travel direction 。
4
4
4
4 ） Speed
Speed
Speed
Speed reduction
reduction
reduction
reduction
The
The
The
The mechanical
mechanical
mechanical
mechanical drive
drive
drive
drive forklift
forklift
forklift
forklift
This forklift adopts synchronizing speed
device, therefore there is no need of
operating the clutch again. Release the
accelerating pedal, step down the clutch
pedal to the limit, put the speed lever at I
gear position, after releasing the clutch pedal,
press sown the accelerating pedal.
The
The
The
The hydraulic
hydraulic
hydraulic
hydraulic forkift
forkift
forkift
forkift
Release the accelerating pedal slightly, step
down the brake pedal if necessary.
Warning
Warning
Warning
Warning
Should reduce the speed ：
• At the crossing
• The crowd place.
• Rough road surface and other
scraggy surfaces.
• Approach the goods or barriers
5
5
5
5 ） Steering
Steering
Steering
Steering
Different from the ordinary vehicle, the
guide wheel is mounted on the rear part of
forklift, which make rear part of the forklift
rotates outside during steering. When
carrying out steering performance, reduce
the travel speed and turn the steering wheel
to the expected side. The steering wheel
should advance a little than the forklift with
front wheel steering.
6
6
6
6 ） parking
parking
parking
parking the
the
the
the forklift
forklift
forklift
forklift
Reduce the travel speed, step down the
brake pedal to stop the machine. The
shifting lever is at the neutral gear.
Caution
Caution
Caution
Caution
• When the forklift uprises the slope, do
To Next Page
Loading...
Need help?
General
