61
the status of speed reduction for the
machine.
33
33
33
33 ) Brake
Brake
Brake
Brake inspection
inspection
inspection
inspection
Drive the machine slowly and step
down the brake pedal to check the
brake effect. After stepping down the
brake pedal, the brake lamp will be on.
34
34
34
34 ) Steering
Steering
Steering
Steering inspection
inspection
inspection
inspection
When the machine travels slowly,turn the
steering wheel, observe the left and right
steering force are the same, whether there
are other abnormal phenomena.
35
35
35
35 ) Parking
Parking
Parking
Parking brake
brake
brake
brake inspection
inspection
inspection
inspection
Make sure that pull up parking brake lever,
machines travelling at a slow speed can be
stopped by brake.
36
36
36
36 ) back-up
back-up
back-up
back-up lamp
lamp
lamp
lamp inspection
inspection
inspection
inspection
When the shifting lever is at the
reversing gear, the back-up lamp is on.
3
3
3
3 、 Maintenance
Maintenance
Maintenance
Maintenance
1
1
1
1 ) Drain
Drain
Drain
Drain water
water
water
water from
from
from
from oil
oil
oil
oil and
and
and
and water
water
water
water
separator
separator
separator
separator
The
The
The
The engine
engine
engine
engine forklift
forklift
forklift
forklift ( selected
selected
selected
selected
configuration
configuration
configuration
configuration )
When the indicating lamp of oil and water
separator is on :
a. Shut down the engine, turn (A) part
4~5 circles. Press the pump (B).
Continuously press the pump (B) until
drain the water in the oil and water
separator.
b. Tighten drain plug, press the pump (B)
several times. Observe whether there is
leakage at the plug.
c. Make sure the indicating lamp will not
be on after the engine startup.
2
2
2
2 ) Exhaust
Exhaust
Exhaust
Exhaust of
of
of
of fuel
fuel
fuel
fuel system
system
system
system
The
The
The
The diesel
diesel
diesel
diesel forklift
forklift
forklift
forklift
a. Shut down the engine, loose the plug
on the injection pump.
b. Tighten the plug, make sure there is no
fuel leakage.
c. Press the pump to exhaust. Press the
plug until the fuel will flow out of the
plug.