Look Solutions Tiny CX - Wiring of Connectors

10
5. Operating the Tiny CX
5.6 Wiring of Connectors
Mini-Stereo jack plug:
Sleeve = Ground, Ring = switch on/off, Tip = 11.1 V DC (+) output
5.5 Battery Status Display
TheyellowLED[5]ontheTiny C07 indicates (among other things (see point 7.2))
how strong the battery still is and/or when it may need to be recharged.
1) LED flashes slowly:
 Batterycapacityof15%–100%,thebatteryisfullyoperational
2) LED flashes fast:
 Batterycapacitybelow15%–thebatteryshouldbechangedand/orcharged.
3) LED lights up permanently:
The battery is flat
of the radio remote (option) momentarily provided no new fogging period has been
programmed in or not.
The programmed fogging time cannot be recalled by pressing the start button in
the machines lid [4]. If the start button in the lid is pressed, the Tiny CX will produce
fog as long as the button is held down, regardless of whether a fogging time has been
programmed in.
5.4.2 Deleting a programmed fogging time
The programmed fogging time can be deleted in the following way. Therefor insert
the battery and connect the cable remote or the receiver of the radio remote to the
machine.
• Pressthestartbuttoninthemachineslid[4]momentarilyandpressthestartbutton
on the cable remote or the transmitter of the radio remote for confirmation. The
programmed fogging time is now deleted.
The Tiny CXnowproducesfogforaslongasthestartbuttoninthemachineslid[4],
on the cable remote or the transmitter of the radio remote is held down.