Look Solutions Tiny CX - Service and Maintenance; Changing the Vaporizer; Vaporizer Removal; Vaporizer Installation

14
7. Service and Maintenance
7.1 Changing the Vaporizer
The micro vaporizer especially developed for the Tiny CX has a limited working life.
Depending on application duration, the fogging output will reduce after a while and
the vaporizer will need to be changed.
7.1.1 Removal of the Vaporizer
a) Separate the Tiny CX fromthebattery.Thereforpullthetwosilverpusher[7]atthe
sides of the machine coeval in the direction of the fluid tank. The battery unlocks
and slides out.
b)Unscrewthefourscrews[2]withasuitablescrewdrivertoreleasethestainlesssteel
hood.
c) Remove the stainless steel hood.
d)Unscrewthetwoscrews[13]atthevaporizerwithasuitablescrewdriver.
e) Slideoutthevaporizer[9]forwards.
f) Removetheuidtube[10]fromthetubingspout[11]ofthevaporizer.Ifthetubing
does not come off, you can pull on it with a pair of small pliers or a similar tool.
g) Clean the interior of the unit with an absorbant, fluff-free cloth.
7.1.2 Installation of the Vaporizer
a)Plugtheuidtube[10]ontothetubingspout[11]ofthenewvaporizer.
b)Mountthenewvaporizertotheconnectingpins[12]withthetwoscrews[13].
c) Check the connections and make sure that the fluid tubing is not twisted or bent.
d)Mountthestainlesssteelhoodwiththefourscrews[2]atthemachinescover.Ensure
that the hood engages into the corresponding guide groove of the lid part.