EasyManua.ls Logo

Look Solutions Tiny CX - Starting-Up the Tiny CX; Programming of a Fixed Fogging Time; Programming the Fogging Time

Look Solutions Tiny CX
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
5. Operating the Tiny CX
5.4 Programming a fixed fogging time
(only if an optional cable remote or radio remote is supplied)
For some applications it will be useful to program in a fixed fog amount, which can
be easily reproduced later.
The shortest fog time is pre-programmed. If a new fog time is programmed, the pre-
programmed fog time will be deleted.
a) Insert the battery and connect the cable remote or the receiver of the radio remote
to the machine.
b)Pressandholdthestartbuttoninthemachineslid[4].Whentherequestedfogging
time is reached, press and release the start button at the cable remote or one of
the buttons at the transmitter of the radio remote to confirm the fogging period.
Nowthefoggingtimeissavedandthestartbuttoninthemachineslid[4]canbe
released.
5.4.1 Programming the fogging time
The microprocessor saves the fogging time and this programmed fogging time can
now be recalled by pressing the start button on the cable remote or at the transmitter
Todisconnectthebattery,pullthetwosilverpusher[7]atthesidesofthemachine
coeval in the direction of the fluid tank. The battery unlocks and slides out.
Please note: To avoid complete discharge of the battery during long storage periods,
the battery has to be disconnect from the machine and has to be recharged regularly
(at least every 6 months)!
c) Pressthestartbuttoninthelidofthemachine[4].Afterapprox.1secondtheunit
generates fog as long as the button is hold.
If you would like to control the machine via the cable remote or radio remote (both
as an option), connect the control cable for the remote or the receiver of the radio
remote to the machine. You can start the fogging process by pressing the start button
at the cable remote or radio remote.
Caution: Do not put anything into the fog nozzle. This may destroy the vaporizer and
it then has to be changed.
If the Tiny CX is not generating fog, the machine switches off automatically after
approx.1minute.TheyellowLED[5]doesnotlightanymore.Themachinecanstillbe
activated at any time by pressing the start button in the machines lid, the cable remote
or the radio remote.

Related product manuals