Look Solutions UNIQUE 2 - Error Code E-4: Overheating; Error Code E-8: Vaporizer Clogging; Error Code E-1: Service Required; Specifications

18
Procedure: Haze machine without compressor
Power requirement: 1300 Watt
Voltage: 120 V/ 60 Hz
Warm up time: approx. 60 Seconds
Fluid tank capacity: 2 liters
Integrated Fan: > 6000 l/min.
Haze density: variable
Control: DMX 512
0 - 10 V analogue
cable remote (option)
Dimensions (L x W x H): 18.5 x 10 x 10 ft
Manufactured for:
Look Solutions - Fog machines made in Germany
7. Troubleshooting
E – 1
E – 8
Trouble: E-4 appears on the LED display
Cause: The machine is getting too hot. The heating
switches off and the machine cools down.
Solution: Disconnect the machine from the mains supply
for a moment and then re-connect it.
Trouble: E-8 appears on the LED display
Solution: The vaporizer is clogged.
Cause: Please send the machine to the service-station
or your local dealer.
Trouble: E-1 appears on the LED display
Solution: Please send the machine to the service-station
or your local dealer.
8. Specifications
E – 4