Lorex LHV1000 SERIES User Manual

Using FLIR Cloud™ Client for PC or Mac
17
5. Use the chart to select which presets you would like to include in the tour and the order
of presets.
• Preset: Select the preset number.
• Time(s): Enter the time in seconds the camera will remain on the selected preset.
• Operation: Click
to add a preset to the tour. Click to delete a preset from
the tour.
6. Click OK to save changes.
To run a PTZ tour:
1. Select the tour number and click
.
17.3.3 PTZ Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click
to open the Advanced controls. Select Pattern.
2. Select the number of the pattern you would like to set up.
3. Move the camera into the desired start position.
4. Click
to start recording the pattern.
5. Move the camera to the desired end position. Then, click
to stop recording the
pattern.
To run a pattern:
1. Select the pattern number and click
.
#LX400014; r. 2.0/15899/15899; en-US
81

Lorex LHV1000 SERIES Specifications

General

Brand	Lorex
Model	LHV1000 SERIES
Category	DVR
Language	English