EasyManua.ls Logo

Lorex LNZ44P4 Series - Safety Instructions

Lorex LNZ44P4 Series
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Instructions1
Read this guide carefully and keep it for future reference.
Follow all instructions for safe use of the product and handle with care.
Use the camera within given temperature, humidity, and voltage levels noted in the Technical
Specifications.
Camera is rated for outdoor use and is weatherproof when properly installed. Camera is not
intended for submersion in water. Installation under a sheltered environment is recommended.
Do not disassemble the camera.
Do not point the camera directly towards the sun or a source of intense light.
Use only the supplied regulated power supply. Use of a non-regulated, non-conforming power
supply can damage this product and voids the warranty.
Make sure to install the camera in a location that can support the camera weight.
Make sure there are no live electrical cables in the area where you plan to mount the camera.
Periodic cleaning may be required. Use a damp cloth only. Do not use anything other than
water to clean the dome cover, as chemicals such as acetone can permanently damage the
plastic.
#LX400075; r. 4.0/58710/58717; en-US 1

Table of Contents

Related product manuals