Controlling the PTZ camera with
LNR / NR Series NVRs
6
The following instructions are based on the LNR400 Series NVR. See your NVR’s instruction
manual for instructions on controlling the PTZ camera with your system. For the latest list of
compatible NVRs, please visit lorextechnology.com/compatibility.
To connect the PTZ camera to the system:
1. Connect the camera to your NVR as detailed in , page .
2. Right-click on the live view of the PTZ camera and click Main Menu. Enter the system user
name (default: admin) and password (default: 000000) if prompted.
3. Click
>SETTING>PAN/TILT/ZOOM.
4. Under Channel, select the channel your PTZ camera is connected to.
5. Under PTZ Type, select Remote.
6. Click OK. You can now control your PTZ camera using the system.
6.1 Controlling the PTZ Camera
1. In Live View, double-click the channel that has the PTZ camera connected to open in full-
screen.
2. Right-click and click PTZ. Enter the system user name and password if prompted. The PTZ
menu opens.
3. Use the on-screen controls to control the camera.
#LX400075; r. 4.0/58710/58717; en-US 15
To Next Page
Loading...
Need help?
General
