Controlling the PTZ camera with
LNK Series NVRs
7
The following instructions are based on the LNK7000 Series NVR. See your NVR’s instruction
manual for instructions on controlling the PTZ camera with your system. For the latest list of
compatible NVRs, please visit lorextechnology.com/compatibility.
To connect the PTZ camera to the system:
1. Connect the camera to your NVR as detailed in 3 Connecting the Camera.
2. Right-click anywhere on the live viewing mode to open the Quick Menu, then select Main
Menu.
NOTE
If prompted, enter the system user name (default: admin) and your password.
3. Under Settings, click Display to open the IP Camera tab.
4. Click
next to the connected PTZ camera you want to edit. The camera attributes appear.
5. Under Protocol, select ONVIF.
6. Click OK to save changes.
7.1 Controlling the PTZ camera
To access the PTZ controls:
• Right-click on the live viewing area for the PTZ camera to open the Quick Menu, then click
PTZ.
OR
• Hover the mouse near the top of the live viewing area for the PTZ camera to reveal the Mini
Menu, then click
.
NOTE
If prompted, enter the user name (default: admin) and your secure password.
#LX400075; r. 4.0/58710/58717; en-US 19
To Next Page
Loading...
Need help?
General
