Controlling the PTZ Camera with an
NVR
5
The camera can accept PTZ commands directly through the Ethernet cable. There is no need to
run special wiring to control the movement of the PTZ camera.
LNZ44P4 camera is compatible with LNR / NR / LNK Series NVRs, excluding the LNR200
and LNR300 Series NVRs.
• For instructions on controlling the PTZ camera with the LNR / NR Series NVRs, see 6 Con-
trolling the PTZ camera with LNR / NR Series NVRs, page 15
• For instructions on controlling the PTZ camera with the LNK Series NVRs, see 7 Controlling
the PTZ camera with LNK Series NVRs, page 19
#LX400075; r. 4.0/58710/58717; en-US 14
To Next Page
Loading...
Need help?
General
