M
marshallstevenAug 7, 2025
What to do if there is no picture on monitor/TV after connecting it to the Lorex DVR?
- DDr. Roger Thompson MDAug 7, 2025
If there's no picture on your monitor/TV after connecting it to the Lorex DVR, first power off the monitor/TV and the DVR. Then, power on the monitor/TV, followed by the DVR. Also, make sure you've selected the correct input channel on your monitor/TV for the DVR connection. Check that the video cable is securely connected to both the DVR and the monitor/TV. If the video-out resolution is incorrect, press and hold the button on the remote control until the DVR restarts, which will reset the resolution to the default setting (1024x768).