Lorex lx4471w User Manual

Using the PC/Mac Client Software
17
17.14 Configuring Basic Network Settings
The basic network menu allows you to configure the network protocol type (DHCP or
Static).
To configure basic network settings:
1. Click the Remote Setting tab, and click Network.
2. Configure the following:
• Type: Select between DHCP or Static. If you select Static, you can edit the IP ad-
dress, Subnet Mask, Gateway, and DNS settings.
• Auto Port Forwarding: Select Enable or Disable to enable or disable the Auto
Port Forwarding feature.
3. Click Save to apply your settings.
17.15 Configuring the System Substream
You can adjust the data streaming rate (also called the SubStream) when you connect to
the system remotely. If you want to conserve bandwidth, select a lower frame rate and
bitrate.
NOTE
Setting your system to stream with a lower frame and bitrate may cause the video to appear choppy or
slow.
#LX400066; r. 1.0/26388/26388; en-US
79

Lorex lx4471w Specifications

General

Brand	Lorex
Model	lx4471w
Category	Security System
Language	English