Mobile Apps: Accessing your DVR Using a Mobile Device18
5. Configure the following:
5.1. Under Name, enter a name for your DVR of your choice.
5.2. Press the QR code icon (
) next to Device ID and line up the QR code on the
top of the DVR using the camera on your device.
OR
If your device does not have a camera (e.g. 1st generation iPad), manually en-
ter the Device ID printed on the label.
5.3. Under Client Port, enter the DVR’s Client Port (default: 9000).
5.4. Under User Name, enter the DVR’s User Name (default: admin).
5.5. Under Password, enter the DVR’s Password (default: 000000).
1. Tap Save. If this is the first time connecting, you will be prompted to change the DVR
password. Tap OK. Enter a new 6 character password and tap Done. This password
will be used to connect to your system from now on.
2. Tap Save again to connect to the DVR. The app opens in Live View and streams video
from all connected cameras.
#LX400066; r. 1.0/26388/26388; en-US
90
To Next Page
Loading...
Need help?
General
