Chapter 2 Specifications
2-15
2.4.3 Preset
(1) When Enable Preset is On, current count is changed into preset setting value. Only with setting of preset, current count is not
changed and you have to execute the Enable Preset ot change the current count.
(2) Operation method
Setting preset value -> Enable Preset On
Enable Preset
Count start
Current count
400
200
0
-200
Preset value
setting
200 -200
Notes
(1) To use preset function by external input signal, set Enable Preset as 1 (on), turn on external preset input signal.
(2) If you execute the preset by external input signal, external preset detection becomes 1 (On), When external preset detection is
1(on), external preset is not executed. In order to change external preset detection as 0 (Off), turn on external preset detection
reset..
To Next Page
Loading...