Chapter 2 Specifications
2-21
2.4.7 Auxiliary mode
High Speed counter module provides 6 auxiliary modes as well as basic count function and compared output function. In order to use
the auxiliary modes, auxiliary mode enable signal is to be “On”.
Notes
(1) To use auxiliary function by program, turn off the external auxiliary mode and turn on Enable Auxiliary
(2) To use auxiliary function by an external signal, turn on the external auxiliary mode and turn on External auxiliary input signal
(GATE).
1. Count clear
(1) When Auxiliary Mode enable signal is On, present count value is set to 0.
(2) Setting method
Set auxiliary mode setting mode to 1 -> Auxiliary mode enable signal On.
Auxiliary
Enable
Count start
Current count
400
300
0
-200
Now running
To Next Page
Loading...