LS Industrial Systems XGF-HO2A - Auxiliary Mode Setting and Enable Auxiliary Function

Chapter 7 Programming
7-15
7.2.7 Auxiliary mode setting and Enable auxiliary function
Program example setting auxiliary mode and executing Enable auxiliary function. You can check the operation result of auxiliary
function at 7.2.3 Counter check.
1. Counter Clear
When auxiliary function is on, change current counter as 0.
(1) Setting contents
Parameter CH0 CH1
Auxiliary mode 1: Counter Clear 1: Counter Clear
(2) Program
(a) Scan program of XGK series
(b) Scan program of XGI/XGR