Chapter 7 Program
7-2
(a) How to set base and slot number
1) Basic base
2) Extension base
a) Extension base stage 1
b) Extension base stage 2
(3) Use of GET/GETP instruction
(a) HSC module is installed at slot 8 of basic base and While M00000 is On, it transmits the data (data1, data2) of internal
memory 5 and 6 to D00015 and D00016.
XGK CPU module HSC module
D area Internal memory Data
D00015 5 Data1
D00016
6 Data2
To Next Page
Loading...