MOWING PROBLEMS
STEPPED CUTTING
Stepped cutting is sharp ridges or uneven levels left in the lawn surface. Stepped cutting is usually caused
by mower deck damage or misadjustment, or damage to mower blades.
Blades are installed incorrectly. Reinstall the blades correctly.
Deck shell is damaged. Repair or replace the deck.
Mower spindle is bent or loosed. Repair or replace the spindle.
Blades are damaged. Replace the blades.
CAUSE SOLUTION
Tire are not properly inflated. Check and inflate the tires.
Deck is not leveled correctly. Level the deck correctly.
- 24 -
To Next Page
Loading...
