6 -3
MT2 25S
PTO
Type Electro-hydraulic rear PTO / MID PTO
No. of speed 1- speed gear with neutral
PTO / Engine
540 rev/min / 2580 rev/min (Rear PTO)
2500 rev/min / 2647 rev/min (MID. PTO)
HYDRAULICLIFT
3 Point linkage CAT1
Draft load detection N/A
Lowering speed control
& fixing device
Down speed control valve
Pump Engine drive
Rated flow 21.1 LPM (5.6 GPM)
System pressure 15.0 MPa (2176 psi)
Lift
capacity
Lower link end 850 kgf (1896 lbf)
24˝ behind lift
point
600 kgf (1323 lbf)
REMOTE
CONTROL
Type N/A for rear remote couplers
No. of Q/coupler N/A for rear remote couplers
F/Loader coupler Loader valve with extension couplers (optional)
STEERING SYSTEM
Type Hydrostatic
Oil Transmission oil (common use)
Min. turning radius
(with brake)
2.5 m (8.2 ft)
Max. steering angle 54˚
No. of steering turns 3.0 turns (lock to lock)
Rated flow 14.1 LPM (3.7 GPM)
System pressure 12 MPa (1740 psi)
To Next Page
Loading...
