LS tractor MT2 Series - Changing Speed; Emergency Stop

4 -7
(3) Changing speed
HST type
 Move the throttle lever forward to increase the
driving speed.
 Press down the HST pedal slightly or fully to
control the driving speed.
 Set an appropriate driving speed according to
the road conditions with the range gear shift
lever.
 Before operating the range gear shift lever,
release the HST pedal to return to the neutral
position, press down the brake pedals, and stop
the tractor completely.
HST type
(4) Emergency Stop
PARK
Brake pedals
Key switch
Parking brake
lever
Brake pedals
Throttle lever
HST pedals
3. Apply the parking brake after pressing brake
pedals.
1. Release the HST pedal and press down the
brake pedals immediately. Turn off the key
switch.
2. Do not press down the HST pedal before
the engine has been stopped completely.
Brake pedals
Throttle lever
HST pedals
Range gear shift lever