2 -3
(3) Seat adjustment
Before operating the tractor, adjust the driver’s
seat position according to body size and length.
① Seat F/R adjustment lever
1) After sitting on driver’s seat, move the seat
adjustment lever upward to release the lock.
2) Move the driver’s seat forward or backward
depending on driver’s body length.
3) Release the seat adjustment lever and check
the seat is locked.
Seat F/R adjustment lever
Release
warning
▶DO NOT put your hand under the seat while sitting. It may cause a serious injury
by seat suspension.
▶DO NOT adjust the seat position while driving.
Armrest angle adjustment wheel
③ Armrest angle adjustment wheel
- It is used to adjust the armrest angle.
- Rotate the wheel inside to lower the armrest.
- Rotate the wheel outside to lift the armrest.
Backrest angle adjustment lever
② Backrest angle adjustment lever
- It is used to adjust the backrest angle.
- Lift up the lever to release the backrest lock and
adjust the backrest angle with the lever pulled
up.
- After adjusting, release the lever and check the
backrest locked in place.
Release
To Next Page
Loading...
Need help?
General
