LS tractor MT335 User Manual

3 -24
 This switch is used to set / release the cruise
control for HST type tractor.
- Cruise : Press the upper side of the switch
while driving forward.
- Release : Press the lower side of the switch to
stop the cruise control drive.
 To stop the cruise drive, press down the both
brake pedals or lower side of the cruise control
switch. The forward pedal returns to the neutral
position and the cruise drive will be disengaged.
▶DO NOT press the one-side brake pedal during the cruise drive. You must connect
the left and right brake pedal with the brake pedal latch before driving in order to
avoid a possible accident.
▶Do not operate the cruise control switch while driving backward.
Caution
Cruise control switch
(16) Cruise control switch (HST models only)
(17) HST forward / reverse pedal
(HST models only)
 Press down the HST forward pedal slowly in
order to move the tractor forward and if releasing
the pedal, it returns back to the neutral position,
and tractor stops.
 The HST reverse pedal is operated in the same
way as the HST forward pedal.
 To start the engine, these pedals must be placed
in neutral position. For the details of the engine
start, see chapter 4-2-(1), “Engine start” in this
manual.
 If pressing the HST pedal when the HST linked
pedal switch is activated, the engine speed will
vary depending on the HST pedal displacement.
(optional) For the details, see next page.
HST
reverse
pedal
HST
forward
pedal
Warning
▶ When releasing the HST pedal while driving in high speed, the braking distance
can be extended depending on the load conditions. At this time, press down the
brake pedal(s) to stop the tractor.
▶ DO NOT operate the HST pedal hastily. It may cause a shock to you.

LS tractor MT335 Specifications

General

Brand	LS tractor
Model	MT335
Category	Tractor
Language	English