LS tractor MT335 - Differential Lock Pedal; Work Light Switch

3 -39
(3) Differential lock pedal
 When rear wheel is slipping and the tractor can
not move forward, stop the tractor and press
down the differential lock pedal.
 The differential lock is effective for working on the
slippery ground.
 If the differential lock is engaged, both rear
wheels will rotate at equal speed. So, It can
disturb the steering operation, and you cannot
turn smoothly.
 Take your foot off the pedal to release the
differential lock. If the differential force is
reduced to some extend, the lock is released
automatically.
 If the differential lock does not disengaged (i.e.
the turning radius is larger than normal and the
turning is not smooth), depress the clutch pedal
and/or press down the left/right one-side brake
pedal slightly for a second each other.
 This pedal is installed on the step floor, but the
location is ;
- on the right-hand side for mechanical model
- on the left-hand side for HST model.
Differential
lock pedal
HST
(4) Work light switch
① Rear work light
 The rear work light has a switch on its back. To
turn on/off the rear work light, operate the switch
as shown in the right figure.
ON
OFF
▶When driving on the road at night, do not let the rear work lights stay ON. It may
cause a disturbance to the driver of the following cars.
Caution
▶Do not turn the tractor with pressing the differential lock pedal.
▶Do not use this differential lock pedal while driving on public road.
▶Do not engage the differential lock when one wheel is spinning.
Warning
Differential
lock pedal
Mechanical