3 -38
HST type
4WD lever
PTO gear
lever (if fitted)
(See chapter 3-5-(4))
Middle PTO
lever (if fitted)
Parking brake
lever
Differential lock
pedal
Range gear
shift lever
(2) Parking brake lever
This lever is used to apply the parking brake.
Pull it upward with pressing down the brake
pedals after locking the brake pedals each other
with brake pedal latch. Release the brake
pedals slowly to check slippage of the tractor.
The parking brake lever can be used for
emergency stop.
To disengage the parking brake, pressing down
the brake pedals, and push the lever downward
after pressing the release button.
Parking brake lever
PARK
Important to owner, read carefully
(See chapter 3-5-(5))
Caution
▶ DO NOT drive the tractor with the parking brake is engaged. It may cause damage
of the brake or parking brake system.
Button
(See chapter 3-5-(6))