4 -41
4-6. Driving speed
Note) Engine rated speed : 2600 rev/min, Dynamic load radius : 526mm (20.7 in.)
- Front tires : 7-14 4PR / Rear tires : 11.2-24 8PR
Range
gear
LM H
Main gear 1 2 3 4 1 2 3 4 1 2 3 4
Forward
1.18
(0.74)
1.73
(1.07)
2.24
(1.39)
2.76
(1.72)
3.23
(2.01)
4.71
(2.93)
6.11
(3.80)
7.54
(4.68)
9.88
(6.14)
14.41
(8.95)
18.69
(11.61)
23.05
(14.33)
Reverse
1.13
(0.70)
1.64
(1.02)
2.13
(1.32)
2.63
(1.63)
3.07
(1.91)
4.48
(2.78)
5.81
(3.61)
7.17
(4.46)
9.40
(5.84)
13.71
(8.52)
17.78
(11.05)
21.93
(13.63)
HST Type
- Front tires : 7-14 4PR / Rear tires : 11.2-24 8PR
Note) Engine rated speed : 2600 rev/min, Dynamic load radius : 526mm (20.7 in.)
Range gear L M H
Forward
0~4.76
(0~2.95)
0~9.72
(0~6.04)
0~21.88
(0~13.59)
Reverse
0~4.76
(0~2.95)
0~9.72
(0~6.04)
0~21.88
(0~13.59)
Mechanical Type
Driving speed of the tractor or revolution speed of the PTO shaft must be selected appropriately
depending on the type of work, tires or ground conditions. For safety, operate the tractor at a
suitable speed. (Unit : Km/h -> Mile/h)