LS tractor MT345E - Recommended Maximum Specification of Implements

4 -33
No. Implements Specification MT345E/HE MT350E/HE MT355E/HE
1 Trailer Max vertical load See chapter 4-5-(3) in this manual.
2 Mid mower Max cutting width
1829 mm
(72 in.)

1829 mm
(72 in.)
3
Rear mounted
mower
Max cutting width
1829 mm
(72 in.)

1829 mm
(72 in.)
4 Flail Mower Max cutting width
1880 mm
(74 in.)

1880 mm
(74 in.)
5 Sickle Bar Max cutting width
1900 mm
(74 in.)

1900 mm
(74 in.)
6
Rear mounted
Sprayer
Total weight
500 kg
(1102 lb.)

500 kg
(1102 lb.)
7 Pull type Sprayer Total weight See chapter 4-5-(3) in this manual.
8 Rotary Tiller Max tilling width
1880 mm
(74.0 in.)

1880 mm
(74.0 in.)
9 Furrow Plow Max tilling width
1700 mm
(67.0 in.)

1700 mm
(67.0 in.)
10 Bottom Plow Maximum size
1350 mm
(53.0 in.)

1350 mm
(53.0 in.)
11
Disk harrow
(pull type)
Max working width
1880 mm
(74.0 in.)

1880 mm
(74.0 in.)
12 Chisel Plow Max working width
1500 mm
(59.0 in.)

1500 mm
(59.0 in.)
13 Front grader Max working width
1880 mm
(74 in.)

1880 mm
(74 in.)
14 Rear blade Max working width
1880 mm
(74 in.)

1880 mm
(74 in.)
15 Front loader
Max lift capacity
(Bucket pivot point)
1013 kg
(2229 lb)

1013 kg
(2229 lb)
16 Landscape Rake Max working width
2134 mm
(84 in.)

2134 mm
(84 in.)
17 Box blade Max working width
1829 mm
(72 in.)

1829 mm
(72 in.)
18 Backhoe
Max weight
(W/O Bucket)
485 kg
(1069 lb)

485 kg
(1069 lb)
19 Snow Blade Max. width
1829 mm
(72 in.)

1829 mm
(72 in.)
20 Snow Blower Max. working width
1829 mm
(72 in.)

1829 mm
(72 in.)
(9) Recommended Maximum Specification of Implements
 When attaching an implement to the tractor, refer to the following specifications recommended as a
maximum capacity of each implement. DO NOT attach any bigger implement than these
specifications. For other implements not mentioned, contact your authorized local dealer.