4 -7
1. Lift up all the implements(front/middle/rear)
from the ground after starting engine.
3. Press clutch pedal fully and place all the
transmission gear levers (main, range,
shuttle lever) on a suitable position.
4. After pressing down brake pedals, release
the parking brake lever.
5. Release clutch pedal slowly with pressing
down the throttle pedal slowly.
(2) How to drive
Mechanical type
Clutch pedal
Parking brake lever
Brake pedals
Release
Throttle pedals
Main gear shift lever
Range gear shift lever
Shuttle lever
2. Place the throttle lever to the low speed
position.
▶Release the clutch pedal slowly. If not, the transmission gear life will be reduced
and it may cause a sudden start.
Notice
To Next Page
Loading...
