3 -42
(5) Engaging speed +/- switch
(PSS)
It is used to adjust the engaging speed of the
power shuttle clutch when operating clutch pedal
or power shuttle lever.
Engaging speed adjustment of the clutch
pedal;
1. Press the upper side (symbol part) of the
engaging speed +/- switch with depressing
clutch pedal fully.
2. The engaging speed level will be displayed on
the instrument panel from level 1 to level 3. The
higher the number is, the faster the engaging
speed is.
3. If pressing the upper side (symbol part) of this
switch within 5 seconds, the engaging speed
level is increased. Otherwise, the level is
decreased.
4. The changed level is saved after blinking 3
times.
Engaging speed adjustment of the power
shuttle lever;
1. Comply with the same process of the clutch
pedal engaging speed adjustment without
depressing clutch pedal.
2. The engaging speed level will be displayed from
level 1 to level 9.
▶If pressing this switch over 10 seconds, it will be a useless thing and it may cause
malfunction. Be careful that this switch is not pressed by unintended operation.
Caution
Engaging speed +/- switch
EHL
Engaging speed +/- switch
MHL
Engaging speed level
To Next Page
Loading...
