5 -19
5-6. Check before starting (Daily check)
(1) Engine oil
Oil specification and capacity :
See chapter 5-3, “Lubricants and Capacity” or
the last page in this manual.
Checking engine oil level
- Check the engine oil level before starting
engine or at 5 minutes later after stopping
engine.
- Check if the oil level is between MAX and MIN
marks of the oil gauge. If necessary, add new oil.
- It must only be checked while the engine is
stopped.
- If your engine is operated in dusty/dirty
condition, the service interval must be shorter
than normal condition.
- Must replace the engine oil and engine oil filter
after the first 50 hours of use.
Engine oil gauge
Engine oil gauge
Before starting engine, check the followings carefully to avoid any failure or damage.
Oil filling inlet
Wheel bolts and
tightening of
each part
Brake, Clutch
pedal operation
Engine
coolant
level
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
level
Cleanness of
radiator screen
Engine oil
level
Operation
of Indicators
Tire air pressure
and damage
Conditions of air
cleaner primary
element
Transmission
oil level
To Next Page
Loading...
