LS tractor MT573 - Lubricant and Capacity Details; Recommended Lubricants and Capacities

7 -5
Lubricants and Capacity
LUBRICANTS CAPACITY
INTERNATIONAL
STANDARD
RECOMMENDED
ITEMS
Engine coolant
10 ℓ
(2.6U.S.gals)
ASTM D6210
Soft water (50%)+
Anti-freeze (50%)
Fuel
100 ℓ
(26.4U.S.gals)
- ASTM D975-08a Grade 2
- EN590 : 2009 Diesel fuel
- BS2869 : 2006 Class A2
Ultra low sulfur
diesel fuel,
below 15 ppm
Engine oil
7.0 ℓ
(1.8U.S.gals)
API CJ-4, ACEA E3
KIXX DL
(Maker : GS Caltex)
Transmission oil
(Hydraulic lift,
Steering)
55 ℓ
(14.5U.S.gals)
API-GL4
ISO VG 32/46
LSTH400G
(Maker : GS Caltex)
Front axle oil
4.4 L (1.2 U.S.gals) for
center housing
0.6 L (0.2 U.S.gals) for
each final housing
=5.6 L (1.5 U.S.gals)
API-GL4
SAE 80W
EPK 80W90
(Maker : S-OIL TOTAL
Co. Ltd.)
Grease
(Front axle holder,
3-point linkage)
Proper amount NLGI 2
MAHWAK Multi
purpose or MAHWAK All
purpose (Caltex)
Clutch & Brake oil
0.5 ℓ
(0.1U.S.gals)
Mineral based oil
(ISO 7308)
LSTH400 (S-OIL TOTAL)
LHM PLUS (TOTAL)
LHM (Mobil)
LHM-S (Shell)
RECOMMENDED ENGINE OIL VISCOSITIES
The correct engine oil viscosity grade is dependent upon ambient temperature. Refer to the below
chart when selecting engine oil for your tractor.
In areas where prolonged periods of extreme temperatures are encountered, local lubricant practices
are acceptable. Contact your authorized local dealer.
Oil
Viscosity
-30
(-22)
-25
(-13)
-20
(-4)
-15
(5)
-10
(14)
-5
(23)
0
(32)
10
(50)
20
(68)
30
(86)
40
(104)
SAE 10W-30
SAE 15W-40
SAE 5W-40
Ambient
Temperature
℃(℉)