LS tractor MT573 - Engine Coolant Temperature Gauge; Optional Forward;Neutral;Reverse Indicators

3 -5
14
Engine coolant temperature gauge
 This gauge indicates the engine coolant
temperature during operation. It activates when
the operator turns the key switch to the ON
position. The gauge will register cold with the
key switch in the OFF position.
 The closer the needle approaches “H” mark, the
higher the temperature of engine coolant is. If
the needle moves to red portion of the gauge,
this indicates an overheated condition. Stop the
engine immediately and check the problem.
 Coolant is very hot. When checking the coolant,
comply with the instructions of the chapter 5-12-
(1), “Replacement of Engine coolant” in this
manual.
 These indicators will be turned on/off when operating the power shuttle lever to FORWARD/
NEUTRAL/REVERSE position on the power shuttle models.
15
Forward/Neutral/Reverse indicator(optional)
14
15