4 -40
4-6. Driving speed
The driving speed of the tractor or the revolution speed of PTO has to be selected appropriately
depending on the type of work, tires or ground condition. For safety, operate the tractor at a suitable
speed. (Unit : Km/h -> Mile/h)
Note) Engine rated speed : 2600 rev/min, Dynamic load radius : 578mm (22.8 in.)
- Front tires : 9.5-16 6PR / Rear tires : 13.6-24 8PR
① Standard speed (creeper off)
Range
gear
1234
Main
gear
1234123412341234
Forward 1.12 1.33 1.56 2.09 2.53 3.00 3.53 4.73 5.60 6.64 7.81 10.5 14.5 17.2 20.2 27.1
mph 0.70 0.82 0.97 1.30 1.57 1.87 2.19 2.94 3.48 4.13 4.85 6.50 9.01 10.7 12.6 16.8
Reverse 1.02 1.20 1.42 1.90 2.30 2.73 3.20 4.29 5.08 6.03 7.08 9.49 13.2 15.6 18.3 24.6
mph 0.63 0.75 0.88 1.18 1.43 1.69 1.99 2.67 3.16 3.75 4.40 5.90 8.17 9.69 11.4 15.3
Range
gear
1234
Main
gear
1234123412341234
Forward 0.18 0.22 0.25 0.34 0.41 0.49 0.58 0.77 0.91 1.08 1.27 1.71 2.36 2.80 3.30 4.41
mph 0.11 0.13 0.16 0.21 0.26 0.30 0.36 0.48 0.57 0.67 0.79 1.06 1.47 1.74 2.05 2.74
Reverse 0.99 1.18 1.38 1.86 2.25 2.67 3.13 4.20 4.97 5.90 6.93 9.28 12.9 15.3 17.9 24.0
mph 0.62 0.73 0.86 1.15 1.40 1.66 1.95 2.61 3.09 3.66 4.31 5.77 8.00 9.5 11.1 14.9
② Optional speed (creeper on)
- Front tires : 9.5-16 6PR / Rear tires : 13.6-24 8PR
Note) Engine rated speed : 2600 rev/min, Dynamic load radius : 578mm (22.8 in.)
Mechanical Type
To Next Page
Loading...
