LSIS 004iC5-1 User Manual

1. Basic information and precautions
1-3
1.3 Removal and Reinstallation
1.3.1 Removal of the front cover
 To change parameter setting: Press the pattern with a finger slightly
as 1) and push it downward as 2). Then 4-way button will appear.
Use this button for parameter setting and changing the value.
 Removal for wiring: The method is the same as shown in 1. Hold both
sides of the cover and lift upward to completely remove from the main
body.
3. Lift it up to
remove.
2. Hold both
sides of
this part.
2)
1)
2)
1. Push
down the
cover until
cover top
matches
the side
slot.
1)
Parallel!
2. Push it
down
4-Way
Button
Side
slot
1. Press here
gently

LSIS 004iC5-1 Specifications

General

Brand	LSIS
Model	004iC5-1
Category	DC Drives
Language	English