LTH Electronics MXD73 - Page 103

Data Logging
- 30 -
User Interface Guide
Data Logging
Configure Graph
Select how many traces to show on the graph.
/
– Select Option
EXIT
– Cancel
– Save Selection
Trace Channel
Select which channel the trace is assigned to.
Available channels depend upon which channels
have been recorded in the selected log.
/
– Select Option
EXIT
– Cancel
– Save Selection
Trace 1 (—)
Select which measurement Trace 1 (left hand side
axis) is to be associated with. The options shown
depend on the configuration of the instrument.
/
– Select Option
EXIT
– Cancel
– Save Selection
Trace Min
Enter the Trace’s minimum displayed value. Adjust in
conjunction with the maximum displayed value to
increase the measurements displayed resolution.
/
– Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value