Setup
- 38 -
MXD70 Conductivity Setup and
Operating Guide
Setup
Channel Setup
( available options vary with card type and configuration )
Channel 1 Channel 2 Channel 3
Mode: Online / Offline
Description
Units
Sensor / Probe Type
Cell Constant
Range
Linearisation Source
TDS Factor
Membrane Correction Factor
Bias Voltage
mA Input: Loop Mode
mA Input: Input Mode
Set 0mA Input
Set 4mA Input
Set 20mA Input
Temperature Input Sensor
Temperature Units
Temperature Compensation: In/Out
Temperature Compensation Slope
Temperature Compensation: Auto / Manual
Fixed Temperature Input
Input Salinity
Pressure Compensation: Auto / Manual
Pressure Mode: Input / 24V Loop
Pressure Units
Pressure 4mA Input
Pressure 20mA Input
Fixed Pressure Input
Cable Compensation
Input Filter
To Next Page
Loading...
