LTH Electronics MXD73 - Page 403

Channel Setup
- 16 -
MXD70 Auxiliary mA Input
Setup and Operating Guide
Channel Setup
Set 0mA Input
Enter the displayed value equivalent to a 0mA input.
Note. Only available when input mode is set to 0mA –
20mA input.
/ – Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value
Set 4mA Input
Enter the displayed value equivalent to a 4mA input.
Note. Only available when input mode is set to 4mA –
20mA input.
/ – Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value
Set 20mA Input
Enter the displayed value equivalent to a 20mA input.
Note. Only available when input mode is set to 4mA –
20mA input.
/ – Increase / Decrease Digit

– Select Next Digit
EXIT
– Cancel
– Save Value