Digital Video Recorder User Manual
85
Sensor Input 4 Ports
Alarm Output 1-Out (Programmable), Terminal
Motion Detection Available for Each Camera with Multi-detection Level
CONNECTOR
Video Input
BNC×4
Main Monitor Output
BNC×2(Parallel), S-Video×1, VGA×1(optional)
Audio Input (Mono)
RCA×2
Audio Output (Mono)
RCA×1
Sensor Input Terminal Block
Alarm Output Terminal Block
PTZ (RS-485) 2 Pins Terminal Block
Ethernet RJ-45, 10/100Mbps
USB 1.1 2 Ports
ELECTRICAL
Power Source DC 12V
Power Consumption TDP 21Watt
BACKUP
Digital Backup Network, USB 1.1
OTHERS
OS Embedded Linux operation system
Duplexer or Triplex Triplex
Control Device Front Panel, USB mouse, remote controller
PTZ control Panel, mouse remote controller or internet
To Next Page
Loading...
