Lumel N10 User Manual

30
7. ORDERING CODES
Table 7
Execution codes for the N10 network parameter meter
NETWORK PARAMETER METER N10 X X X X X XX X
Input current I
n
:
1 A (X/1) 1
5 A (X/5) 2
acc. order * 9
Input phase voltage U
n:
100 V 1
400 V 2
acc. order * 9
Digital output:
without interface 0
with RS 485 interface 1
Display:
red digits 1
green digits 2
Power supply:
85...250 V d.c. or a.c. 40...400 Hz 0
acc. order* 9
Kind of execution:
standard 00
custom-made 99
Acceptance tests:
without additional requirements 8
with a quality inspection certicate 7
acc. customer’s agreements ** X
* after agreement with the manufacturer
** the execution numbering will be made by manufacturer

Lumel N10 Specifications

General

Brand	Lumel
Model	N10
Category	Measuring Instruments
Language	English